Olympus E-3 - Flash Intensity Control

79
EN
Flash shooting
6
The flash intensity can be adjusted from +3 to –3.
In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), you may get
better results by adjusting the amount of light emitted by the flash (“flash intensity”). It is useful
when you intend to increase the contrast (distinction between light and dark) of images to make
the images more vivid.
Setting display
To adjust the flash using only the dials:
j Assign the flash intensity control function to the main dial (or sub dial). g “DIAL” (P. 97)
x Notes
• This does not work during manual flash.
• This does not work when the flash control mode on the electronic flash is set to MANUAL.
• If flash intensity is adjusted on the electronic flash, it will be combined with the camera’s flash
intensity setting.
• When [ w + F ] is set to [ON] , the flash intensity value will be added to the exposure
compensation value.
g “ w + F ” (P. 103)
Flash intensity control
Direct button w + k
Super control panel ip : [ w ]
Menu MENU  [ X ]  [ w ]
Viewfinder Control panel
 TIPS
w button
k