Olympus E-3 - Page 56

56
EN
4
Focusing and shooting functions
• When the button is released, the currently selected AF target
lights. When
M or N is set, you can select the AF target to
be used at that point. For operation, refer to Step 2 in “Selecting
the AF target position” (
g P. 56) in the next section.
• When M or N is set, you can turn the dial to select the AF
target.
• When M or N is set, you can select the AF target with p .
Selecting the AF target position
Select the AF target to use with Single target AF mode.
1 Press the P button and release your finger to enable selection of the AF target.
2 Use the main dial / sub dial or arrow pad to select
the AF target.
• Use the main dial to perform the same operation as
ac , and use the sub dial to perform the same operation
as
bd .
• You can change the operation of the dials and arrow pad
for selecting the AF target.
g “ P SET UP” (P. 97)
• Press the i button to return the position of the AF target
to the center.
Direct button P + k
Super control panel ip : [AF AREA] P
+
k
Menu MENU  [ X ]  [AF AREA]
i button
MENU button
P button
k