95
EN
Playback functions
7
Erasing selected frames
This function lets you erase selected images at one time
during single-frame playback or index display.
1
Display the images you want to erase and press the
i
button.
•
The selected images will be shown with red frames.
•
To cancel your selection, press the
i
button again.
•
During index display, press
p
to select the images you
want to erase and press the
i
button.
2
Press
p
to display the next images you want to
erase and press the
i
button.
3
After you have selected the images to erase, press
the
S
button.
4
Use
ac
to select [YES], then press the
i
button.
All-frame erase
1
MENU
[
W
]
[CARD SETUP]
2
Use
ac
to select [ALL ERASE], then press the
i
button.
3
Use
ac
to select [YES], then press the
i
button.
•
All frames will be erased.
To erase immediately:
j
If you have set “QUICK ERASE” (
g
P. 105) to
[ON]
,
pressing the
S
button will erase an image immediately.
j
You can set the initial position of the cursor to
[YES]
.
g
“PRIORITY SET” (P. 106)
TIPS
ERASE SELECTED
YES
NO
BOTH RAW&JPEG ARE ERASED
CANCEL SELECT
GO
ALL ERASE
FORMAT
CARD SETUP
CANCEL SELECT
GO
YES
NO
ALL ERASE
CANCEL SELECT
GO
To Next Page
Loading...
