Olympus E-M10 Mark III S - Formatting the Card (Card Setup); Deleting All Images (Card Setup)

Menu functions (Setup menu)
4
113 EN
Formatting the card (Card Setup)
Cards must be formatted with this camera before rst use or after being used with
other cameras or computers.
All data stored on the card, including protected images, is erased when the card is
formatted.
When formatting a used card, conrm there are no images that you still want to keep
on the card. g “Usable cards” (P. 138)
1
Select [Card Setup] in the d Setup Menu and press
the Q button.
• If there is data on the card, menu items appear. Select
[Format] and press the Q button.
2
Select [Yes] and press the Q button.
• Formatting is performed.
Card Setup
All Erase
Format
Back Set
Deleting all images (Card Setup)
All images on a card can be deleted at a time. Protected images are not deleted.
1
Select [Card Setup] in the d Setup Menu and press
the Q button.
2
Select [All Erase] and press the Q button.
3
Select [Yes] and press the Q button.
• All images are deleted.
Card Setup
All Erase
Format
Back Set