Shooting
2
62
EN
Digital Zoom (Digital Tele-converter)
This option takes a crop at the center of the frame the same dimensions as the size
option currently selected for image quality and zooms it in to ll the display. The zoom
ratio increases by about 2×. This allows you to zoom in past the lens’ maximum focal
length, making it a good choice when you are unable to switch lenses or nd it dicult
to get any closer to your subject.
• Press the b button to set the digital teleconverter to [On].
• H is displayed on the monitor.
• To exit digital zoom, press the b button again.
• Digital zoom is not available when multiple exposure, panorama, or keystone
compensation is selected in Z mode or when [Standard] is selected in movie mode.
• When a RAW image is displayed, the area visible in the monitor is indicated by a frame.
• AF target drops.
• If another role is assigned to the Fn2 button, choose [b] (P. 89).
To Next Page
Loading...
