Olympus E-M10 Mark III S - Letting the Camera Choose Aperture and Shutter Speed (Program Mode)

Shooting
2
45 EN
Letting the camera choose aperture and shutter speed
(Program mode)
P mode is a shooting mode where the camera automatically sets the optimal aperture
and shutter speed according to subject brightness. Set the mode dial to P.
250250 F5.6
P
Wi-Fi
L
N
S-IS ONS-IS ON
F
FHD
30p
ISO-A
200
1023
1:02:03
0.0
Shooting mode
Shutter speed
Aperture value
• The shutter speed and aperture selected by the camera are displayed.
• You can use the front dial to select exposure compensation.
• You can use the rear dial to select program shift.
• The shutter speed and aperture value displays will blink if the camera is unable to achieve
correct exposure.
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
When using a xed [ISO] setting, change the setting. g “Changing ISO sensitivity
(ISO)” (P. 65)
Warning display
example (blinking)
Status Action
60"60" F2.8F2.8
The subject is too
dark.
• Use the ash.
F22F22
40004000
The subject is too
bright.
• The metered range of the camera is
exceeded. A commercially available ND
lter (for adjusting the amount of light) is
required.
• Take pictures in silent mode. g “The
Electronic Shutter (Silents)” (P. 69)