Olympus E-M10 Mark III S - Attaching a lens to the camera

Preparation
1
17 EN
Attaching a lens to the camera
1
Conrm that the ON/OFF lever is
in the OFF position.
ON/OFF lever
2
Remove the rear cap of the lens
and the body cap of the camera.
1
2
1
2
Rear cap
3
Align the lens attachment mark (red) on
the camera with the alignment mark (red)
on the lens, then insert the lens into the
camera’s body.
Lens attachment mark
4
Rotate the lens clockwise until you hear it
click.
• Do not press the lens release button.
• Do not touch internal portions of the camera.