Olympus E-M10 Mark III S - External flash units

Cautions
7
141 EN
External ash units designated for use with this camera
With this camera, you can use one of the separately sold external ash units to
achieve a ash suited to your needs. The external ashes communicate with the
camera, allowing you to control the camera’s ash modes with various available ash
control modes, such as TTL-AUTO and Super FP ash. An external ash unit specied
for use with this camera can be mounted on the camera by attaching it to the camera’s
hot shoe. You can also attach the ash to the ash bracket on the camera using the
bracket cable (optional). Refer to the documentation provided with the external ash
units as well.
The upper limit of the shutter speed is 1/200 sec. when using a ash.
 Functions available with external ash units
Optional ash Flash control mode GN (Guide number) (ISO100)
FL-700WR
TTL-AUTO, MANUAL, FP TTL AUTO,
FP MANUAL, MULTI, RC, SL MANUAL
GN 42 (75/150 mm *
1
)
GN 21 (12/24 mm *
1
)
FL-900R
TTL-AUTO, AUTO, MANUAL,
FP TTL AUTO, FP MANUAL, MULTI,
RC, SL AUTO, SL MANUAL
GN 58 (100/200 mm *
1
)
GN 27 (12/24 mm *
1
)
STF-8 TTL-AUTO, MANUAL, RC*
2
GN 8.5
*1 Maximum lens focal length at which unit can provide ash coverage (gures following
slashes are 35 mm format equivalent focal lengths).
*2 Functions as commander (transmitter) only.