Shooting
2
63
EN
Choosing an AF Target Mode (AF target settings)
The frame showing the location of the focus point is referred to as the “AF target”. You
can choose the size of the AF target. You can also select Face Priority AF (P. 64).
1
Press H to display the AF target.
2
Select [I (Single Target)] or [J (9-Target Group)] using the front dial.
ii
o
ii
ii
o
All Targets
The camera automatically chooses from the full set of focus
targets.
I
Single Target
You can choose a single AF target.
J
9-Target Group
The camera automatically chooses from the targets in the selected
nine-target group.
• The single target mode is automatically applied in movie shooting if the group target mode
is set.
• When using a Four Thirds system lens, the camera automatically switches to single target
mode.
Setting the AF target
You can position the target over your subject.
1
Press H to display the AF target.
• If [o (All Targets)] is selected, select [I (Single Target)] or [J (9-Target Group)]
using the front dial.
2
Use FGHI to choose a focus area.
• The size and number of the AF targets changes with the aspect ratio (P. 76) and the
option selected for [Digital Tele-converter] (P. 103).
$
• Touch controls can also be used.
To Next Page
Loading...
