Olympus E-M10 Mark III S - Adjusting I-Enhance Effects (Effect); Effect* 1

Shooting
2
86 EN
Adjusting i-Enhance e󰀨ects (E󰀨ect)
Choose the strength of the i-Enhance e󰀨ect when [i-Enhance] is selected for picture
mode (P. 72).
1
Press the u button in P/A/S/M modes.
• In B, ART, SCN, and Z modes, the display of the
LV super control panel is controlled via [KControl
Settings] (P. 115).
2
Use FGHI to select [E󰀨ect], then press the Q
button.
3
Adjust the e󰀨ect using HI and press the Q
button.
Picture Mode
Standard
250250 F5.6
P
1023
1:02:03
S - AF
N
WB
Auto
ISO
Auto
M-IS
S-IS On
sRGB
FHD
60p
S
Normal
A ± 0
± 0.0
±
0 ± 0
± 0
G ± 0
Effect
i-Enhance
E󰀨ect
3Low (E󰀨ect: Low)
Adds a low i-Enhance e󰀨ect to images.
3Standard
(E󰀨ect: Standard)
Adds an i-Enhance e󰀨ect between “low” and “high” to images.
3High (E󰀨ect: High)
Adds a high i-Enhance e󰀨ect to images.