Olympus E-M10 Mark III S - Adjusting Settings for Connection to a Smartphone

Connecting the camera to a smartphone
5
126 EN
Adjusting Settings for Connection to a Smartphone
Start the OI.Share App installed on your smartphone.
1
Select [Connection to Smartphone] in the q Playback Menu and press the
Q button.
• You can also connect by tapping w in the monitor.
2
Following the guide displayed on the monitor, proceed with the Wi-Fi settings.
• The SSID, password and QR code are displayed on the monitor.
QR code
SSID
Password
Preparing Wi-Fi Connection
Connecting to your
smartphone.
Read QR code by
'OLYMPUS Image Share'.
3/3
SSID : X-XXXXX-X-XXXXXXXX
Password : 00000000
End Wi-Fi
3
Tap the camera icon at the bottom of the OI.Share display.
• An [Easy Setup] tab will be displayed.
4
Follow the on-screen instructions in OI.Share to scan the QR code and adjust
connection settings.
• If you are unable to scan the QR code, follow the on-screen instructions in OI.Share
to adjust settings manually.
To connect, enter the SSID and password displayed by the camera into the Wi-Fi
settings dialog displayed by OI.Share.
• w1 will be displayed when a connection is established.
5
To end the connection, press MENU on the camera or tap [End Wi-Fi] on the
monitor screen.
• You can also turn the camera o󰀨 and end the connection from OI.Share.