Olympus E-M10 Mark III S - Setting the date;time and the language

Preparation
1
20 EN
Setting the date/time and the language
Date and time information is recorded on the card together with the images. The le
name is also included with the date and time information. Be sure to set the correct
date and time before using the camera. Some functions cannot be used if the date and
time have not been set.
You can change the language used for the on-screen display and error messages from
English to another language.
1
Display the menus.
• Press the MENU button to display the menus.
• A guide is displayed in 2 seconds after you select an option.
• Press the INFO button to view or hide guides.
MENU button
2
1
1
Shooting Menu 1
Picture Mode
Digital Tele-converter
Metering
Off
p
Reset
Back Set
2
Select [X] in the [d] (setup) tab.
• Use FG on the arrow pad to select [d]
and press I.
• Select [X] and press I.
2
1
Setup Menu
X
English
s
Firmware
Wi-Fi Settings
Rec View
j±0 k±0
’--.--.-- --:--:--
Card Setup
Back Set
W
0.5 sec
[d] tab
3
Set the date, time, and date format.
• Use HI to select items.
• Use FG to change the selected item.
• Press the Q button to set the camera
clock.
4
Select [W] (changing the display
language) in the [d] (setup) tab.
• Use FGHI to highlight a language
and press the Q button to select the
highlighted language.
X
Y M D Time
2020 Y/M/D
Cancel
The time is displayed using
a 24-hour clock.
5
Press the MENU button to exit the menus.
• If the battery is removed from the camera and the camera is left for a while, the date and
time may be reset to the factory default setting.