Shooting
2
85
EN
Applying lter eects to monochrome pictures (Color Filter)
Color lter eects can be added when [Monochrome] is selected for picture mode
(P. 72). Depending on the color of the subject, color lter eects can make subjects
brighter or enhance contrast. Orange adds more contrast than yellow, red more
contrast than orange. Green is a good choice for portraits and the like.
1
Press the u button in P/A/S/M modes.
• In B, ART, SCN, and Z modes, the display of the
LV super control panel is controlled via [KControl
Settings] (P. 115).
2
Use FGHI to select [Color Filter], then press
the Q button.
3
Highlight an option using HI and press the Q
button.
Picture Mode
N
F
250250 F5.6
Normal
P
1:02:03
N
T
S
-
AF
N
WB
Auto
ISO
Auto
M-IS
S-IS On
A
±
0
±
0.0
S
±
0
±
0
sRGB
FHD
60p
G
±
0
Monochrome
Color Filter
Color Filter
N:None Creates a normal black and white image.
Ye:Yellow Reproduces clearly dened white cloud with natural blue sky.
Or:Orange Slightly emphasizes colors in blue skies and sunsets.
R:Red
Strongly emphasizes colors in blue skies and brightness of crimson
foliage.
G:Green Strongly emphasizes colors in red lips and green leaves.
Adjusting the tone of a monochrome image (Monochrome Color)
Add a tint to black-and-white pictures in the [Monochrome] picture mode (P. 72).
1
Press the u button in P/A/S/M modes.
• In B, ART, SCN, and Z modes, the display of the
LV super control panel is controlled via [KControl
Settings] (P. 115).
2
Use FGHI to select [Monochrome Color], then
press the Q button.
3
Use HI to choose a value and press the Q
button.
Picture Mode
N
F
250250 F5.6
Normal
P
1023
1:02:03
N
T
S
-
AF
N
WB
Auto
ISO
Auto
M-IS
S-IS On
A
±
0
±
0.0
sRGB
FHD
60p
S
±
0
±
0
G
±
0
Monochrome Color
Monochrome
Monochrome Color
N:Normal Creates a normal black and white image.
S:Sepia Shoot in sepia-tinted monochrome.
B:Blue Shoot in blue-tinted monochrome.
P:Purple Shoot in purple-tinted monochrome.
G:Green Shoot in green-tinted monochrome.
To Next Page
Loading...
