Preparation
1
16
EN
Inserting the card
In this manual, all storage devices are referred to as “cards.”
The camera uses third-party SD, SDHC, or SDXC memory cards conforming to the SD
(Secure Digital) standard. Read “Usable cards” (P. 138) before use.
1
Loading the card.
• Open the battery/card compartment cover.
• Slide the card in until it is locked into place.
g “Usable cards” (P. 138)
3
Terminal
area
2
1
• Turn o the camera before loading or removing the battery or card.
• Do not forcibly insert a damaged or deformed card. Doing so may damage the card
slot.
2
Closing the battery/card
compartment cover.
• Be sure the battery/card compartment
cover is closed before using the camera.
2
1
Removing the card
Press the inserted card lightly and it will be
ejected. Pull out the card.
• Do not remove the card while the card
write indicator is displayed (P. 21).
To Next Page
Loading...
