Olympus E-M10 Mark III S - Page 44

Shooting
2
44 EN
• To maximize the benets of the art lters, some of the shooting function settings are
disabled.
• If [RAW] is currently selected for image quality (P. 76), image quality will automatically
be set to [YN+RAW]. The art lter will be applied to the JPEG copy only.
• Depending on the subject, tone transitions may be ragged, the e󰀨ect may be less
noticeable, or the image may become more “grainy.”
• Some e󰀨ects may not be visible in live view or during movie recording.
• Your choice of lters, e󰀨ects, and movie quality when recording movies may a󰀨ect
playback speed and smoothness.
 Using [Partial Color]
Record only selected hues in color.
1
Select [Partial Color I/II/III] in the art lter menu
(P. 42).
2
Highlight an e󰀨ect and press the Q button.
• A color ring appears in the display.
ColorColor
3
Rotate the front dial or rear dial to select a color.
• The e󰀨ect is visible in the display.
4
Shoot.
• If you want to change the extracted color after shooting, rotate the front dial or rear dial to
display the color ring.