105
EN
9
Customizing your camera
Monitor indication:
Press the INFO button repeatedly to display the level
gauge. g“Switching the information display” (P. 41)
To calibrate the level gauge:
j g“LEVEL ADJUST” (P. 111)
x Notes
• If the camera is tilted forward or backward to a
large degree, the error of the horizontal titling
increases.
MOVIE R
Set to [ON] to record sound when shooting movies.
V EXP/e/ISO
EV STEP
You can select the EV step for exposure parameter setting, such as shutter speed, aperture
value, or exposure compensation value, from [1/3EV], [1/2EV], or [1EV].
METERING gP. 49
AELMetering
You can set the metering mode when pressing the AEL/AFL button to lock the exposure.
• [AUTO] performs metering in the mode selected under [METERING].
ISO gP. 53
ISO STEP
You can select the EV step of the ISO sensitivity from [1/3EV] or [1EV].
ISO-AUTO SET
You can set the upper limit and default ISO values when ISO is set to [AUTO].
[HIGH LIMIT]
This sets the upper limit of the ISO value that automatically changes. The upper limit
can be set from 200 to 6400 in 1/3 EV increments.
[DEFAULT]
This sets the value to be normally used when the optimum exposure can be obtained.
The value can be set from 200 to 6400 in 1/3 EV increments.
TIPS
Displayed when the display range is
exceeded.
s0019_e_00_0_unified.book Page 105 Friday, April 24, 2009 9:21 AM
To Next Page
Loading...
