110
EN
Customizing your camera
9
[AUTO]
Even when a new card is inserted, the folder numbers are retained from the previous
card. If the new card contains an image file whose file number coincides with one
saved on the previous card, the new card’s file numbers start at the number following
the highest number on the previous card.
[RESET]
When you insert a new card, the folder numbers starts at 100 and the file name starts
at 0001. If a card containing images is inserted, the file numbers start at the number
following the highest file number on the card.
EDIT FILENAME
You can rename image files to make them easier to identify and organize.
The portion of the filename that can be changed depends on the color space. g“COLOR
SPACE” (P. 108)
PRIORITY SET
You can customize the initial position of the cursor ([YES] or [NO]) on the Erasing images or
Formatting the card screen.
dpi SETTING
You can set the resolution for printing images in advance. The set value is recorded on the
card with the images.
[AUTO] Automatically set according to the image size.
[CUSTOM] You can make the desired setting. Press i to display the setting screen.
Z K UTILITY
PIXEL MAPPING gP. 129
EXPOSURE SHIFT
You can adjust the default value for optimal exposure for each metering mode according to
your preference. This can be set in 1/6 EV increments ranging from -1.0 EV to +1.0 EV.
x Notes
• The exposure compensation can be set from -3.0 EV to +3.0 EV. Setting [EXPOSURE
SHIFT] reduces the range of the direction in which the default value is adjusted.
• You cannot check the exposure shift value during shooting. To make normal adjustments to
the exposure, perform exposure compensation. g“Exposure compensation” (P. 50)
sRGB : Pmdd0000.jpg AdobeRGB : _mdd0000.jpg
You can change the character to OFF, A - Z or 0 - 9.
s0019_e_00_0_unified.book Page 110 Friday, April 24, 2009 9:21 AM
To Next Page
Loading...
