Olympus E-P1 - Using the Direct Buttons to Operate the Camera; ISO Sensitivity

21
EN
Basic operations
Basic guide
Using the direct buttons to operate the camera
1 Press the button for the function you
want to set
• The direct menu is displayed.
e.g.) Sequential shooting/
self-timer shooting
List of direct buttons
No. Direct button Function Ref. page
1
F
Exposure compensation
P. 50
2
ISO
Sets ISO sensitivity
P. 53
3
WB
Sets white balance
P. 67
4
jY
Sequential/Self-timer shooting
P. 61-62
5
AF
Sets AF mode
P. 56
4
1
5
2
j
Sub dial
2 Turn the sub dial to change the setting, then press the i button
• The function assigned to the button that was pressed remains selected for approximately
8 seconds. You can turn the sub dial and set the function during that time. If no operations
are performed for 8 seconds, the setting for that function is confirmed. g“BUTTON
TIMER” (P. 101)
o j Y 12s Y 2s
P
SINGLE
SINGLE
Direct menu
3
j
Main dial
s0019_e_00_0_unified.book Page 21 Friday, April 24, 2009 9:21 AM