71
EN
4
Record mode, white balance, and picture mode
You can select image tone to create unique image effects. You can also fine-adjust image
parameters such as contrast and sharpness for each mode. The adjusted parameters are
recorded in each picture effect mode.
[hVIVID] : Produces vivid colors.
[iNATURAL] : Produces natural colors.
[jMUTED] : Produces flat tones.
[ZPORTRAIT] : Produces beautiful skin tones.
[MONOTONE] : Produces black and white tone.
[CUSTOM] : Select one picture mode, set the parameters, and register the setting.
You can also register the gradation to [CUSTOM]. This setting is stored
separately from [GRADATION] in the menu. g“Gradation” (P. 72)
The adjustable parameters vary according to the picture
modes.
The individual parameters are as follows.
[CONTRAST] : Distinction between light and dark
[SHARPNESS] : Sharpness of the image
[SATURATION]: Vividness of the color
[B&W FILTER] : Creates a black and white image. The
filter color is brightened and the
complementary color is darkened.
[N: NEUTRAL] : Creates a normal black and
white image.
[Ye: YELLOW] : Reproduces clearly defined
white cloud with natural blue sky.
[Or: ORANGE] : Slightly emphasizes colors in
blue skies and sunsets.
[R: RED] : Strongly emphasizes colors in
blue skies and brightness of
crimson foliage.
[G: GREEN] : Strongly emphasizes colors in
red lips and green leaves.
[PICT. TONE] : Colors the black and white image.
[N: NEUTRAL] : Creates a normal black and
white image.
[S: SEPIA] :Sepia
[B: BLUE] : Bluish
[P: PURPLE] : Purplish
[G: GREEN] : Greenish
Picture mode
Super control panel iINFOk:
[PICTURE MODE]
Menu MENU[W]
[PICTURE MODE]
CARD SETUP
CUSTOM RESET
PICTURE MODE
GRADATION
IMAGE ASPECT
SET
BACK
PICTURE MODE
j
MUTED
i
NATURAL
Z
PORTRAIT
MONOTONE
h
VIVID
CONTRAST
SHARPNESS
SATURATION
i
NATURAL
BACK SET
J
±
0
N
±
0
T
±
0
Lo Hi
Lo Hi
Lo Hi
CONTRAST
SHARPNESS
SATURATION
i
NATURAL
SET
BACK
Lo
0
0
0
+2
+1
-
1
-
2
Hi
CONTRAST
s0019_e_00_0_unified.book Page 71 Friday, April 24, 2009 9:21 AM
To Next Page
Loading...
