39
EN
1
Using live view
By setting [g FACE DETECT] to [ON], the camera will detect people’s faces in the frame
and adjust the focus and metering automatically.
• In order to use the < button, [Fn FACE DETECT ] needs to be set up in the menu in
advance. g“; FUNCTION” (P. 100)
• After setting [g FACE DETECT] to [ON] while using the < button, the following functions
are automatically set to the best settings for taking pictures of people.
1 If the camera detects a face, a frame will be
displayed in that location.
• When you press the shutter button, the camera will focus
on the position of the face detection frame (When M is
selected in [AF AREA] the camera will focus on that
position).
x Notes
• During sequential shooting, face detection will work only
at the first shot.
• Depending on the subject, the camera may not be able
to correctly detect the face.
Using the face detection function
Direct button < (The setting changes each time the button is pressed.)
Live control ij: [g FACE DETECT]
Super control panel iINFOk[g FACE DETECT]
Menu MENU[c][U][g FACE DETECT]
Function Setting Ref. page
METERING
e
P. 49
GRADATION AUTO
P. 72
AF MODE
S-AF P. 56
AF AREA
B
P. 58
250
F5.6
38
P
L
N
250
s0019_e_00_0_unified.book Page 39 Friday, April 24, 2009 9:21 AM
To Next Page
Loading...
