Olympus E-P1 - Warning Level; Level Adjust; F Warning Level

111
EN
9
Customizing your camera
f WARNING LEVEL
You can change the timing when f is displayed (lights up). Normally, there is no need to
change this.
g“LCD monitor (Live view)” (P. 8)
x Notes
• The battery check display is not a warning that the battery needs to be charged. When f
blinks, charge the battery.
LEVEL ADJUST
You can calibrate the level gauge.
[RESET] Resets to the factory default adjustment value.
[ADJUST] Sets the current camera position as the zero point.
x Notes
•Set [ADJUST] only when the camera is secured in a horizontal position. If the camera is not
in a stable position, you may not be able to calibrate the level gauge as desired.
s0019_e_00_0_unified.book Page 111 Friday, April 24, 2009 9:21 AM