Olympus E-P1 - Switching the Information Display

41
EN
1
Using live view
You can switch the information displayed on the monitor by pressing INFO button
repeatedly. You can also switch the information displayed by turning the main dial while
pressing the INFO button.
To quickly switch to the frequently used display:
j You can hide the information display for all modes except “Information display on”. g“INFO
SETTING” (P. 104)
How to read the histogram:
j The following shows you how to read the histogram display easily.
1 If the graph has many peaks around here, the image will appear
mostly black.
2 If the graph has many peaks around here, the image will appear
mostly white.
3 The part indicated in green in the histogram shows the luminance
distribution within the spot metering area.
Switching the information display
 TIPS
250
250
250
F5.6
F5.6
3 8
38
P
L
N
N
250
250
250
F5.6
F5.6
3 8
38
P
250
250
250
F5.6
F5.6
3 8
38
P
250
250
250
F5.6
F5.6
3 8
38
P
Information display on
Scale display
*1
Histogram display
Zoom display
(gP. 42)
Image only
SETWB /
F
+0.3
+0.3
+0.7
+0.7
-
0.3
-
0.3
0.0
0.0
Multi view display
(gP. 42)
*1 With [INFO SETTING] (gP. 104), you can also select [w] or [x] for the ruled line display.
*2 During multiple exposure shooting (gP. 54), the information display then switches to “Multiple
exposure display”.
When [LEVEL GAUGE] (gP. 104) is set to [ON], the information display switches to “Digital level
gauge display”.
*2
1
2
3
s0019_e_00_0_unified.book Page 41 Friday, April 24, 2009 9:21 AM