108
EN
Customizing your camera
9
ALL >
You can apply the same compensation value to all the white balance modes at once.
[ALL SET] The same compensation value applies to all WB modes.
[ALL RESET] The WB compensation value settings applied to each WB mode are all
cleared at once.
If you select [ALL SET]
1) Use hi to select the color direction.
Toward A: Amber-Blue/Toward G: Green-Magenta
2) Use fg to set the compensation value. g“WB compensation” (P. 68)
Releasing the AEL/AFL button takes a sample image. You can check the white balance
you have adjusted.
If you select [ALL RESET]
1) Use fg to select [YES].
COLOR SPACE
You can select how colors are reproduced on the monitor or printer. The first character in
image file names indicates the current color space.
g“FILE NAME” (P. 109)
SHADING COMP.
In some cases, the edges of the image may be shadowed due to the properties of the lens.
The shading compensation function compensates by increasing brightness at the dark edge
of the image. This function is especially useful when a wide-angle lens is used.
x Notes
• This function is not available when a teleconverter or an extension tube is attached to the
camera.
• At higher ISO settings, noise in image edges may be conspicuous.
K SET
You can combine 3 image sizes and 4 compression rates
and register 4 combinations. Select the registered setting
with [K].
g“Selecting the record mode” (P. 64)
Pmdd0000.jpg
P : sRGB
_ : Adobe RGB
[sRGB] Standardized color space for Windows.
[Adobe RGB] Color space that can be set with Adobe
Photoshop.
D
SET
BACK SET
PIXEL COUNT
Y
Y
arge
SF F N SF
XWW
1 2 3 4
Register 4 different combinations
of image settings.
Set the compression rate.
Set the number
of pixels.
s0019_e_00_0_unified.book Page 108 Friday, April 24, 2009 9:21 AM
To Next Page
Loading...
