55
EN
2
Exposure
To cancel the image during shooting:
j Pressing the D button cancels the last picture taken.
To shoot multiple exposures while checking the composition for each frame:
j The overlay images are displayed semi-transparently on the LCD monitor so you can shoot while
checking the position of the image overlay.
To overlay 3 or more frames:
j To overlay 3 or more frames, save the image as a RAW file and use [OVERLAY] to repeat the
multiple exposure shooting.
x Notes
• When multiple exposure is set, [SLEEP] is set to [OFF] automatically.
• RAW images taken with another camera cannot be used for the overlay image.
• When [OVERLAY] is set to [ON], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
• To set the shooting functions, cancel multiple exposure shooting first. Some functions cannot
be set.
• Multiple exposure is cancelled automatically from the first picture in the following situations.
The camera is turned off/The q button is pressed/The MENU button is pressed/The
shooting mode is set to a mode other than P, A, S, M/The lens release button is pressed/
The battery power runs out/The USB cable, AV cable and/or HDMI mini-cable is inserted
• The information for the first frame during multiple exposure shooting is displayed as the
shooting information.
• When a RAW image is selected using [OVERLAY], the JPEG image for the image recorded
in JPEG+RAW is displayed.
• When shooting multiple exposures using bracketing, priority is given to multiple exposure
shooting. While the overlay image is being saved, bracketing is reset to the factory default
setting.
TIPS
s0019_e_00_0_unified.book Page 55 Friday, April 24, 2009 9:21 AM
To Next Page
Loading...
