104
EN
Customizing your camera
7
W # CUSTOM
FLASH MODE gP. 62
Select the firing pattern, timing and other parameters for when the external flash unit is used.
Available flash modes vary according to the exposure mode.
w gP. 63
Adjust the flash firing strength with the range [+3] to [-3].
#X-SYNC.
You can set the shutter speed that will be used when the flash fires. The speed can be set
from 1/60 to 1/180 in 1/3 EV increments.
#SLOW LIMIT
You can set the slow limit of the shutter speed that will be used when the flash fires. The
speed can be set from 1/30 to 1/180 in 1/3 EV increments.
w+F
When set to [ON], it will be added to the exposure compensation value and flash intensity
control will be performed.
X K/COLOR/WB
NOISE REDUCT.
This function reduces the noise that is generated during long exposures. When shooting
night scenes, shutter speeds are slower and noise tends to appear in images. With [NOISE
REDUCT.], you can let the camera reduce noise automatically to produce clearer images.
When set to [AUTO], noise reduction will be activated only when the shutter speed is slow.
When set to [ON], noise reduction will always be activated.
• While noise reduction is activated, it takes about twice the usual time to take a picture.
• The noise-reduction process is activated after shooting.
• During processing the card access lamp blinks. You cannot take more pictures until the
card access lamp turns off.
When set to [OFF]
When set to
[ON] or [AUTO]
s0026_e_00_0_unified.book Page 104 Tuesday, September 29, 2009 10:30 AM
To Next Page
Loading...
