47
EN
1
Exposure
The camera automatically takes pictures at a different ISO sensitivity with the shutter speed
and aperture value fixed. 3 images with different exposures are recorded in the order of the
set ISO sensitivity (optimum exposure when set to [AUTO]), exposure in the – direction, and
exposure in the + direction.
Compensation value: 0.3, 0.7 or 1.0
• The compensation value is set in 1/3 EV increments regardless of the ISO step setting.
Number of frames: 3
x Notes
• Bracketing is performed regardless of the upper limit set with [ISO-AUTO SET].
This overlays multiple frame images and saves the result as a single image. The image is
saved with the record mode set at the time the image is saved.
You can overlay an image while taking a picture or overlay a recorded image in playback
mode.
MULTIPLE EXPOSURE
In shooting mode, 2 frames of pictures taken can be overlaid and saved as a single image.
You can also select a stored RAW image and shoot multiple exposures to create an overlay
image.
[FRAME] : Select [2F].
[AUTO GAIN] : When set to [ON], the brightness of each frame is set to 1/2 and the
images are overlaid. When set to [OFF], the images are overlaid with
the original brightness of each frame.
[OVERLAY] : Then set to [ON], a RAW image recorded on a card can be overlaid
with multiple exposures and stored as a separate image. The number
of pictures taken is one.
IMAGE OVERLAY
In playback mode, up to 3 frames of RAW images can be overlaid and saved as a single
image. g“Image overlay” (P. 87)
Setting display
• When multiple exposure is set, i is displayed. After the
first frame is shot, i is displayed in green.
ISO bracketing
Menu MENU[c][V][BRACKETING][ISO BKT]
Multiple exposure
Menu MENU[X]
[MULTIPLE EXPOSURE]
FRAME
AUTO GAIN
OVERLAY
OFF
OFF
OFF
MULTIPLE EXPOSURE
BACK
SET
s0026_e_00_0_unified.book Page 47 Tuesday, September 29, 2009 10:30 AM
To Next Page
Loading...
