6
Important Information — Please Read Before Use
CLV-190 INSTRUCTION MANUAL
Instrument compatibility
Refer to the “ System chart” on page 109 to confirm that the light source is compatible with the
ancillary equipment being used. Using incompatible equipment can result in patient injury or equipment
damage and makes it impossible to obtain the expected functionality.
This instrument complies with the EMC standard for medical electrical equipment, edition 4
(IEC 60601-1-2: 2014).
When connecting to an instrument that complies with a previous edition of the EMC standard for
medical electrical equipment edition, the EMC characteristics could be vulnerable.
Repair and modification
The light source does not contain any user-serviceable parts. Do not disassemble, modify or attempt to
repair it; patient or user injury, equipment damage, and/or the impossibility to obtain the expected
functionality can result. Some problems that appear to be malfunctions may be correctable by referring
to Chapter 8, “Troubleshooting”. If the problem cannot be resolved using the information in Chapter 8,
contact Olympus. The light source is to be repaired by Olympus technicians only.
Signal words
The following signal words are used throughout this manual:
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury. It may also be used to alert against unsafe practices or potential
equipment damage.
Indicates additional helpful information.
To Next Page
Loading...
