Olympus EVIS EXERA III - 5.10 Extinguishing the Examination Lamp

5.10 Extinguishing the examination lamp
79
CLV-190 INSTRUCTION MANUAL
Ch.5
NOTE
• The standard setting of the airflow regulator indicator is “H” (High).
• Air and water is not fed even if the airflow indicator “ON” is lighting when no
endoscope is connected to the light source.
• The function is available only when a compatible fiber endoscope or videoscope is
connected.
• The airflow regulator setting is retained even after the light source is turned OFF.
The last airflow regulator setting is recalled the next time when the light source is
turned ON.
5.10 Extinguishing the examination lamp
Press and hold the lamp button for about
1 second: the examination lamp is turned OFF,
and the lamp indicator “STBY” lights up.
Figure 5.11
Lamp button
Lamp indicators