Software reference (CDU) i--SPEED 2
76
i--SPEED LT, i--SPEED 2
17. Ethernet Menu
Access: i-- SPEED 2 Home
' Config ' Ethernet
These controls permit the setting of the TCP/IP address of the
on --board Ethernet controller of the camera. The choice of address
is dependant on the individual network being used and should be
chosen by the network administrator. When the appropriate
address has been set, the OK button should be pressed.
Options: TCP/IP(1) TCP/IP(2) TCP/IP(3) TCP/IP(4) OK
` OK Control
This control confirms the numerical entry just made and also
returns to the previous menu.
To Next Page
Loading...