Operation
4
4.2 Control From the Front Panel
41
2
While the monitor or LCD panel is as shown in
Figure 4.7, press the “MULTI PICTURE” button,
“b” or “B” until the desired number of multi-
pictures are displayed.
Each press of the “MULTI PICTURE” button or
“B” changes the number of multi-pictures by one as
“1” “2” “3” “4” “1” ….
Each press of “b” changes the number of multi-
pictures by one as “1” “4” “3” “2” “1” ….
The monitor and LCD panel display correspond
with the number of multi-pictures as shown in
Figure 4.7 and Table 4.2. The printed picture
becomes as shown in Figure 4.8. The memory
mode image is also displayed similarly on the
monitor.
Figure 4.8
NOTE
The multi-picture printing also be controlled in a menu.
The setup made using the above procedure is also
applied to the setup using the menu. For details on
menus, see “Setting “MULTI PIX”” on page 64.
Ta bl e 4 .2
Monitor Screen
Display
LCD Panel
Display
Number of Multi-
Picture Images
1
Single picture without
screen splitting
22
33
44
Single picture without screen splitting
Screen split into 2
Screen split into 3
Screen split into 4
To Next Page
Loading...
