Olympus OEP-5 - Page 71

System Setup
5
5.16 Setup of the “ZM ADJ(S)” “ZM ADJ(L)” Menu
71
2 Press “v” or “V” to select the values as described
in Table 5.7, and press the “ENTER” button.
3 Repeat steps 1 and 2 to set the image capturing
range (see Figure 5.24).
Figure 5.24
Ta bl e 5 .7
Setting item Setting value
H START (RS) 240 to 1000
V START (RS) 0 to 200
H WIDTH 600 to 1400
V WIDTH 600 to 1400
V START
V WIDTH
H START
H WIDTH