15. USPM Setup Procedure
PV6253-F4E016 66
15.4. Modification of uspm.int file
When a USB type control box is in use:
Open and modify the uspm.int file contained in the installed folder. Enter the number marked in
the photometric head section, and save.
Enter the COM port No. in the (No. of port in use) space of the 3rd line, and save.
When a GP-IB type control box is in use:
Enter "0" in the (No. of port in use) space of the 3rd line, and save.
1st line: (Data file ID tag)
2nd line: (Configuration file name)
3rd line: (Port No. in use)
4th line: 38 Change to the value described at the 1st step.
5th line: 77 Change to the value described at the 2nd step.
6th line: 214 Change to the value described at the 3rd step.
7th line: 401 Change to the value described at the 4th step.
8th line: 454 Change to the value described at the 5th step.
9th line: 485
Change to the value described at the 6th step (440 - 840nm excluded).
Last line
:
(Waiting time of shutter) ← In case of 380-780nm, 10
th
Line is last line.
In case of 440-840nm, 9
th
Line is last line.
To Next Page
Loading...
