PV6088-F4E017
3.2. Features of each component
The device
(1) Main unit
Contains the spectrometric optical system.
(2) The ocular body tube (U-BI30-2)
Used for observing the reflected light from the subject.
(3) Photometric head (USPM-380)
Receives and conducts spectrometry of light from the subject.
(4) Lamp house (U-LH100L-3)
Accommodates a halogen lamp.
(5) Control box (UCB-01)
Captures data from the photometric head and transmits it to the computer.
(6) Light source power supply (ULP-01)
Supplies the lamp house with 12 V (DC 12 V output ) power.
(7) Computer
Processes the data sent from the control box and displays the measurement
results.
Optical components
(8) Objective lens of ten magnifications (MPLFLN 10×)
Irradiates the subject with convergent light. This lens allows you to measure a spot
of about 60 μm.
(9) Objective lens of twenty magnifications (MPLFLN 20×)
Irradiates the subject with convergent light. This lens allows you to measure a spot
of about 30 μm.
(10) Eyepiece (MICRO SWH 10×)
Combines with the ocular body tube to observe light reflected from the subject.
Cables
(11) USB cable
Connects the control box with the computer.
(12) Photometric cable
Connects the control box with the photometric head.
(13) Main unit cable
Connects the control box with the main unit.
(14) IO cable
Connects the control box with the light source power supply.
To Next Page
Loading...
