PV6088-F4E017
Samples
(15) BK7 reference sample (reference)
Used for setting the reference values.
(16) Calibration sample for wavelength calibration (CALIB sample)
Used for checking and calibrating the wavelength direction.
Accessories
(17) Lens Spectral Reflectivity Measurement (USPM3-100/USPM3-200) Hardware
Operation Manual
The manual describes how to install the product, conduct measurements with it,
and perform maintenance. Consult this manual when operating the product.
(18) USPM-RU Software Operation Manual
The software manual: Consult this manual when using the software.
(19) USPM-RU/RUIII Installation Guide
The manual describes how to install the software. Consult this manual when
reinstalling the software.
(20) High-intensity halogen lamp (with ten spares)
Spare halogen lamps.
(21) Software CD
Installation CD. Use to reinstall the software.
(22) Set of hexagon wrenches (1.5 mm/2 mm/2.5 mm/3 mm/4 mm/5 mm)
Use these tools to install the photometric head onto the main unit.
3.3. Expendable parts
High-intensity halogen lamps (7023 from PHILIPS, Average life: 50H*)
* Average life is the time when half of the test samples are burned out.
In short, the time at which the survival rate reaches 50%.
To Next Page
Loading...
