PV6088-F4E017
3.6. Names of items on light source power supply (ULP-01)
3.7. Features of light source power supply (ULP-01)
(1) Power switch
Turns the control box power on/off.
(2) IO connector
Terminal to receive and send the control signals. Connected with the control box
via the IO cable.
(3) Lamp connector
Connected with the lamp house via the built-in lamp cable.
(DC 12V output )
(4) Power inlet
Supplies AC power to the control box via the power cord. This inlet also contains a
fuse. For how to replace a fuse, refer to 7. REPLACEMENT OF FUSES.
Figure 3. Light source power supply
To Next Page
Loading...
