12. File Configuration
PV6253-F4E016 54
The CSV format
USPM-RU Ver3.21 Data File : Data file ID tag
wave, DATA1, Data2, ... , Data10 : Data name
wavelength380, Data1 Measured value at wavelength 380, Data2 Measured value at wavelength 380,
--- Data10 Measured value at wavelength 380
wavelength381, Data1 Measured value at wavelength 381, Data2 Measured value at wavelength 381,
--- Data10 Measured value at wavelength 381
wavelength382, Data1 Measured value at wavelength 382, Data2 Measured value at wavelength 382,
--- Data10 Measured value at wavelength 382
wavelength778, Data1 Measured value at wavelength 778, Data2 Measured value at wavelength 778,
--- Data10 Measured value at wavelength 778
wavelength779, Data1 Measured value at wavelength 779, Data2 Measured value at wavelength 779,
--- Data10 Measured value at wavelength 779
wavelength780, Data1 Measured value at wavelength 780, Data2 Measured value at wavelength 780,
--- Data10 Measured value at wavelength 780
[end]
The DAT format
USPM-RU Ver3.20 Data File : Data file ID tag
: Comment
: Number of data point
Data1 : Data name
Data1 Measured value at wavelength 380
Data1 Measured value at wavelength 381
Data1 Measured value at wavelength 780
Data2 : Data name
Data2 Measured value at wavelength 380
Data2 Measured value at wavelength 780
Data10 : Data name
Data10 Measured value at wavelength 380
Data10 Measured value at wavelength 780
[end]
12.5. Additional data file (*add.csv)
When a file of a measurement conducted with USPM-RU is saved in the CSV format, an
additional data file is created automatically. Its file name will be the reflectance data file name
+ add.csv. This file stores L*, a*, b*, x*, y*, Y, hue angle, chroma, mean reflectance, luminous
To Next Page
Loading...
