2 Device overview
The CMC 430 is a light-weight multipurpose test set with ultra low-drift signal generators and
measurement inputs. The CMC 430 reaches calibrator accuracy. All inputs and outputs can be
precisely synchronized to UTC using either the Precision Time Protocol (PTP) according to IEEE 1588
or the IRIG-B time code. Synchronization to GPS is possible using the CMGPS 588 accessory from
OMICRON.
The device has a very accurate time base with Stratum 3 specification and is thus able to provide very
high frequency accuracy even without external synchronization.
The CMC 430 is internally controlled by a very powerful digital processor platform that is responsible
for signal generation and measurement. It allows full support of the IEC 61850 protocol for signal
generation and measurement.
All interfaces and indicators of the CMC 430 are positioned on the front plate. Therefore, the CMC 430
can be operated in different positions according to the specific requirements of the application
environment.
The CMC 430 test set itself does not provide any control elements and requires a suitable control
software or control device for operation. The CMC 430 provides the following options for
communication with the controlling software or device:
• Ethernet
• USB
• Wi-Fi (requires a Wi-Fi adapter available from OMICRON)
Device overview
OMICRON
7
To Next Page
Loading...
Need help?
General
