Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-11
Front Panel Operations
2.
a. In the Operate Functions menu,
select Edit DCF.
b. Press OK.
3.
Use the Right or Left arrow keys to select
the Meter Run or Station (at the top of the
screen) for which you need to update
the DCF.
If the densitometer was not configured for a Station in OMNICONNECT, you will see
this message.
4.
a. When the correct Meter Run or
Station is selected, use the Up or
Down arrow keys to choose either the
Enter DCF A or Enter DCF B line to
edit.
b. Press OK.
5.
a. When the Enter DCF A/B field
becomes active, use the number keys
to enter the new DCF.
b. When finished, press OK or the
Accept function key to save your
changes.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English