Omni 7000 Series - Products Configuration

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
3-6
OMNICONNECT® Operations
5.
Click on any of the items listed under the
Station in the tree to make changes to the
settings, as needed.
6.
If you created the second Station in the
Equipment List (Step 2) and need to
make changes, repeat Steps 4 and 5 for
the second Station.
3.4.3 Products Configuration
Some products will likely be configured during installation of the flow computer. However, updates
may need to be made when new products enter the pipeline.
Liquid Products
To configure liquid products, follow these instructions:
1.
In the Actions ribbon, click Configure.