Omni 7000 Series - Print Prove Passes

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
3-32
OMNICONNECT® Operations
• 1734 – Meter 3 Prove Request
• 1735 – Meter 4 Prove Request
• 1736 – Meter 5 Prove Request
• 1737 – Meter 6 Prove Request
3.5.7 Print Prove Passes
The Print Prove Passes option can only be selected if the prove is a type of Pulse
Interpolation, such as a small volume prover.
To print individual, prove pass data immediately after each pass during the prove sequence,
follow these instructions:
1.
In the Actions ribbon, click Configure.
2.
a. Expand the Prover function in the
Configure tree.
b. Select Configuration and Setup to
display the Prover configuration
options in the screens on the right.