Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-15
Front Panel Operations
3.
Use the Right or Left arrow keys to select
the Meter Run or Station (at the top of the
screen) for which you need to update the
process variables.
If these process variables were not configured for a Station in OMNICONNECT, you
will see this message.
4.
a. When the correct Meter Run or
Station is selected, use the Up or
Down arrow keys to choose the
process variable you wish to edit.
b. Press OK.
5.
a. Use the arrow keys to select the
variable you wish to edit.
b. Press OK to access the field and
make changes.
c. Press OK or the Accept function key
to save your changes.
Depending on the I/O type assigned to the transducer (Temperature, Pressure, etc.),
you may see different items listed on this screen.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English