Omni 7000 Series - Page 27

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
3-4
OMNICONNECT® Operations
3.
When finished, click Apply to save your
changes. The Meter Runs you selected will
now appear in the Configure tree.
4.
To make changes to an existing Meter
Run, expand that Meter Run in the
Configure tree.
5.
Click on any of the items listed under the Meter Run in the tree to make changes to the
settings, as needed.
6.
Continue to edit Meter Run settings, as
needed, by repeating Steps 4 and 5.
You may see different items listed
in the tree, depending on your
selections in the Equipment List.