Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
3-38
OMNICONNECT® Operations
3.
Click on any of the Meter Runs or Stations to see their Batch Control screens. This
screen displays an overview of the batch’s ID information, current status and totalizers.
a. End the batch from this screen if needed by clicking the End Batch button. Go to
Section 3.6.4 for more instructions on ending batches.
b. Adjust the batch size from this screen if needed. Go to Section 3.6.2 Adjust Batch
Size for more instructions on adjusting batch sizes.
On the Batch Control screen, you can also see the batch status and type.
The batch status appears as:
• In Progress – Batch is in progress with the meter active.
• Idle – Batch is in progress with the meter not active.
• Batch Ended – Batch End has been received with the meter not active.
The batch stack type is either Independent or Common.
4.
Click the Batch Stack tab to see the batch stack sequence for that Meter Run or Station.
5.
Double click (or right-click and select
Edit) on any of the numbered rows to
open the Edit Batch Stack window for
that batch in that sequence

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English