Omron E5AZ - Page 135

116
Advanced Function Setting Level Section 5-6
This parameter displays the manipulated variable.
The manipulated variable is displayed when the “manipulated variable monitor
(OUT1) and (OUT2)” parameters are set to “ON”, and not displayed when
these parameters are set to “OFF”.
• If you do not operate any of the keys on the front panel for the time set by
this parameter in the “operation level” and “adjustment level”, the display
automatically returns to the PV/SP display.
• This function is disabled (display does not change automatically) when
this parameter is set to “OFF”.
Manipulated variable display
o-dp
Setting Range
Default
on: Displayed / off: Not displayed off
Function
Setting
Automatic display return time
Setting Range
Unit Default
OFF, 1 to 99 Second off
Function
Setting