Omron fh series User Manual

3 Click OK in the confirmation dialog of version upgrade.
4 Determine a version-up tool to launch.
In the file selection dialog, select the version-up tool stored.
In the case where the Remote Operation tool is for 32-bit, select RemoteVerup_X86.exe. For
64-bit, select RemoteVerup_x64.exe.
When the version-up tool was selected, a version-up confirmation dialog appears.
5 Click OK in the dialog.
Sometimes, the following dialog may appear to prompt the FPGA update. In that case, click
OK.
The following dialog appears and then the update starts.
3 Basic Operations
3 - 47
FH/FHV Series Vision System User’s Manual (Z365-E1)
3-8 Updating Measurement Application [Version-up]
3
3-8-3 By the Remote Operation

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB