Omron fh series - Analyzing Inspection and Measurement Results [NG Analyzer]; Layout of NG Analyzer Window

6-4
Analyzing Inspection and Measure-
ment Results [NG Analyzer]
The NG Analyzer is a tool for analyzing NG factors using images.
Start the NG analyzer by selecting Tool - NG analyzer from the Controller menu.
This tool, which analyzes setting flows, is used mainly in 2 ways.
• Adjustment of measurement set values during start-up
Use sample workpiece images to analyze optimal set values for the processing flow.
• Analysis of NG causes during operation
Use logged images to analyze NG causes.
The operation flow is as follows.
Preparation
Re-measurement
Analysis
Correction
Prepare sample workpiece images or logged images
Re-measure in batch
Identify processing items
Correct the set values
6-4-1
Layout of NG Analyzer Window
6 Performing Measurement and Adjustment
6 - 26
FH/FHV Series Vision System User’s Manual (Z365-E1)