Additional Information
• You can check the available capacity of the external storage in the setting screen. We recom-
mend that you check whether your external storage has enough available capacity before
changing the storage location.
• Clicking Restore the defaults restores the settings to their factory default values.
Factory default settings differ as follows:
Scene group 0, Scene group 1, and after are stored in the Sensor Controller's flash memory.
7 Increasing/Switching Measurement Scenes
7 - 13
FH/FHV Series Vision System User’s Manual (Z365-E1)
7-5 Saving Scene Groups in External Storage [Scene Group Saving Destination Settings]
7
To Next Page
Loading...
