Omron fh series User Manual

Additional Information
For FHV series, even OFF for the Remote Operation is selected, the connection for the remote
operation cannot be disabled.
2 Click Data save to save the settings and restart the Sensor Controller.
3 In the Main window, select System settings - Communications - Ethernet (*****) from the
Tool menu. Set the IP address.
The (*****) area indicates the Serial (Ethernet) contents set in the above step 1
Communication module.
l
Network Settings for Sensor Controller (With Remote Operation PC)
Precautions for Correct Use
The network settings for the Sensor Controller set with this procedure is temporary. Since the
settings are discarded with restarting the Sensor Controller or power off, follow Network Set-
tings for Sensor Controller (With Sensor Controller) on page 10 - 6 after the remote operation
connection.
1 From the Startmenu on your PC, select All Programs - OMRON - FZ_FH Series - FH_FHV
Launcher.
The Launcher window appears.
2
Click the Remote Operation Tool button.
10 Advanced Usage
10 - 7
FH/FHV Series Vision System User’s Manual (Z365-E1)
10-1 Remotely Operating the
Controller [Remote Operation]
10
10-1-1 Environment Settings

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB