Warning
WARNING
This product must be used according to this manual and Instruction Sheet.
Failure to observe this may result in the impairment of functions and performance of the
product.
This product is not designed or rated for ensuring the safety of persons.
Do not use it for such purposes.
Never connect the AC power supply with this product. When the AC power supply is con-
nected, it causes the electric shock and a fire.
If you keep watching the LED light, it may have an adverse effect on the eyes, do not stare
directly into the light emitted from the LED. If a specular object is used, take care not to allow
reflected light to enter your eyes.
Do not touch the terminals while the power supply is ON.
Doing so may result in electrical shock.
Please take external safety measures so that the system as a whole should be on the safe
side even if a failure of a smart camera or an error due to an external factor occurred. An
abnormal operation may result in serious accident.
Please take fail-safe measures on your side in preparation for an abnormal signal due to sig-
nal conductor disconnection and/or momentary power interruption.
An abnormal operation may result in a serious accident.
Caution
Danger of burns. Do not touch the case while the power is ON or just after power is turned
OFF, since it remains extremely hot.
When mounting the lighting module, lens module, and covers, make sure that the screws are
tightened securely. If not, the product may break or malfunction, or injury may result.
Safety Precautions
14
FHV Series Smart Camera Setup Manual (Z408-E1)
To Next Page
Loading...
Need help?
General
