Omron FHV Series User Manual

2-2
Flow of Use Procedure
The following table shows the flow for using the FHV.
Procedure Description Reference
Preparations Installation and Wiring Section 4 Handling and Installation
Environment on page 4 - 1
Section 5 Installation on page
5 - 1
↓
Turning ON Power 6-1 When Turning Power ON and
OFF on page 6 - 2
↓
Connecting the Remote Operation
Tool
7-2 Operating the Smart Camera
Remotely [Remote Operation Tool]
on page 7 - 10
↓
Language Selection in Dialog Box
(only when the Sensor Controller is
started for the first time)
Vision System FH/FHV/FZ5 series
User's Manual (Cat. No. Z365)
↓
Main Window (Layout 0) Display Vision System FH/FHV/FZ5 series
User's Manual
↓
Camera Adjustments (Display the
settings dialog box for a Camera
Image Input processing item.)
Vision System FH/FHV/FZ5 series
User's Manual
↓
Select Tool − System settings,
and then under Startup setting,
set the settings for Basic,
Communication, and Operation
mode.
Vision System FH/FHV/FZ5 series
User's Manual
↓
Click Data save, and then select
Function − System restart.
Vision System FH/FHV/FZ5 series
User's Manual
↓
Select Tool － System settings ,
and then set Camera,
Communication and Other.
Vision System FH/FHV/FZ5 series
User's Manual
↓
Click Data save. Vision System FH/FHV/FZ5 series
User's Manual
↓
2 Overview of FHV Series
2 - 7
FHV Series Smart Camera Setup Manual (Z408-E1)
2-2 Flow of Use Procedure
2

Omron FHV Series Specifications

General

Brand	Omron
Model	FHV Series
Category	Digital Camera
Language	English